Which Paintbrush or Roller to Use for Painting Home | Jones Paint & Glass

Which Paintbrush or Roller to Use for Painting Home | Jones Paint & Glass


When choosing a roller or brush you want
to consider a few things. The first would be when you’re choosing rollers the material that you will be rolling. When you are using latex paints or oil-based
paints or even epoxies or urethanes they will react with the roller in a
particular way. If you are using an industrial product, the chances of it
ruining your roller while you are applying the product can be detrimental
to your product. So there are two types of rollers. There are knit rollers or
there are woven rollers. knit rollers are placed onto the roller core when they are manufactured. Woven rollers are woven into the core and so the fibers of the roller stay put. Knit rollers have a tendency to come out or lose their their fluff as you’re rolling A knit roller will have a thicker nap which will allow you to apply more product on a rougher surface. Whether it be stucco or brick or
cinderblock, you’re going to be able to apply more product with a knit roller
with a thicker nap than you will with a woven roller with a tighter nap that is
stuck into the core. The advantage again with the the woven roller is when you are applying high industrial products you’re not going to be losing fibers
into your coating or your product when it’s when it’s crucial. You’ll want to choose a nap that corresponds with the surface that you’re applying when you’re
applying your product or your paint. The heavier the texture of your surface the thicker your nap will need to be. If you are applying on a drywall or a really
smooth textured finish like a wholly smooth texture on a drywall you’ll want
to use a 3/8 nap or 1/2 inch nap when applying that. If you’re applying paint
on a heavily textured wall that’s a little more orange peel or if you’re
applying something exterior on stucco or brick you’ll want to choose something
with a thicker nap such as a 3/4 inch or even a full inch if necessary. Again the knit rollers can even go up as thick as one and a quarter inch naps to apply a lot of product to get it into the holes and crevices and make sure that you’ve coated your surface well. Brushes. There are two different types of brushes. There are synthetic brushes or there are what are called natural bristle brushes. You will want to choose a brush that corresponds
with the type of product you’re using. If you are using a water-based product you want to go with a synthetic bristle. The synthetic bristle feels like it’s kind
of a plasticy bristle that allows the paint to be held into the brush but then
release onto the surface when it’s appropriate. Your natural bristle brush actually has a natural hair. You want to use a natural
bristle brush when you’re applying an oil-based product or an
oil-based varnish or a polyurethane or an epoxy. These bristles apply the
product really really well. You will not want to use a natural bristle brush when
you are applying a water-based product. The natural bristle just like your own
hair or just like an animal hair it will absorb water and so if you are applying
a water-based product with a natural bristle it will quickly swell up with
water and quickly become unusable. You’ll notice that when you are choosing a
brush there will be angled brushes and there will be straight brushes and that
just depends on what angle you’re able to approach your surface at. The angled
brush makes it really nice when you are painting corners or trim and you’re not
able to get your hand directly flat or parallel, or perpendicular with the surface.
The angled brush will allow you to apply your product at the right angle
depending on where you’re able to approach your surface from. The straight
brush works great for those flat projects whether you are applying
product on a tabletop or a bench or something like that where you’re able to
get directly over your product your straight brushes will work great for
that. But ultimately personal preference when it comes to choosing the angled
versus the straight brush.

Leave a Reply

Your email address will not be published. Required fields are marked *