A container for the stones Piece of wax, used to stick the stones to your pencil A (diamond paint) pencil to hold the stones The package with all the stones in it. We use the Stabilo pencil instead of the default (diamond paint) pencil We also use containers for our stones to keep them seperated and numbered. Let’s start by opening the bag with stones. We take out all the stones, and check with the list if we have all the stones. We already checked the list, you can always do it too for your own painting. Put the stones somewhere, where you can keep them safe and even mark them with its number. Remove a little part of the protection layer, the opened part is where we will start painting. Put some stones of a color you need on the canvas in the small green container. Lets shake it a bit… Put it close to the painting, and lets remove all other things around it first. Now we are ready to start painting the canvas with the stones! Fold the protection layer a bit, we don’t want it to annoy us while painting. Remove a little piece of the protection layer on the wax. Use the pencil and use it on the wax by pushing it in a bit. Now the stones will stick on the pencil. Now you can use the pencil to pick up the stones. And place them on the right spot on the canvas. Keep repeating this till the painting is finished. We speed up the clip now, the action remains the same. because it is pretty dark, we place a lightpad underneath the painting so we can still see what we are doing. The first part is now ready and we can remove the lightpad. We cut out a little piece of tje protection layer at the position what we already painted. Now we can continue later on, without the glue being dried out. Thanks for watching!