HOW TO USE RUBBER PAINT SPRAY – K2 COLOR FLEX

HOW TO USE RUBBER PAINT SPRAY – K2 COLOR FLEX


K2 Color Flex – Rubber spray. K2 Color Flex rubber spray is a revolutionary way to use for temporary colour change of the vehicle or single car parts. K2 Color Flex ensures an outstanding look and protects the elements from scratches, dirt, moisture, diluted acids, rust, oils and grease. Part 1.
How to apply the product? Prepare the surface to be coated – it has to be dry, clean, free from rust and grease. Shake the can app. 3 min before use. Test the product on a hidden area, then apply from a distance of 20-30 cm, use 3-5 thin coats. Do 5 min intervals while applying every further coat, depending on ambient temperature and coating thickness. In critical areas (e.g. corners, edges) the coat has to be sufficiently thick to avoid cracks. Drying time: 10 minutes for dry to touch, 30 minutes for dust-dry, 2 hours for the final hardness. Part 2.
How to remove the product? To remove the coat from the original surface prize the edge off and manually tear off the remaining part of the coat. Use either tweezers or chlorinated solvent to remove rubber excess from the places difficult to reach. Did you like this movie? Subscribe us! We invite you to test K2 products. Car care has never been so easy. See
“How to restore the paintwork with K2 Luster polish pastes?”
or
“How to remove scratches from the paintwork?”

One Comment

Leave a Reply

Your email address will not be published. Required fields are marked *