How to Use a Paintball Gun : How to Disassemble a Paintball Gun

How to Use a Paintball Gun : How to Disassemble a Paintball Gun


Hey I’m Adam Nelson and on behalf of Expert
Village. I’m going to be showing you how to take apart a paintball gun and then explain
the parts inside the paintball gun. The first thing you want to look for is the silver part
back here … now this is a piranha, and it’s pretty similar to variable popular mid level
guns, the spider, as you can see it’s in the same spot. What I’m going to show you is this
one, because it’s easier. You take it from this side push it in pull it out make sure
you don’t lose that and then everything comes out usually like so. Now, the first thing we’re going to do is
add a spring. What the spring does is add to the velocity that determines how far your
paintball shot will go. What you want to do is put it in here, take this and put it in
like so. After that we’re going to take the caulking ram, slide it in like so, then we’ll
take the striker. This is the part that when you pull the trigger will allow the shot to
fire. You’re going to add that on the spring, as you can see it doesn’t go on all the way,
so what we need to do is take this little guy right here. It’s going to go in like so. As you can see there is a hole for this to
go through like that, also hold it through here, this has to be lined up even with this
hole. Now that I’ve put it all back together it’s ready to go back inside the gun. The
main part where you want to hold it when you’re putting it back in the gun is right where
you put that pin to connect both of them together. The last step, see this little button right
here, you push this in so it pulls that part in the gun down so you can push everything
in and then once you get everything in, make sure you hold it so the string doesn’t push
it back out. Then you just push this back in.

5 Comments

Leave a Reply

Your email address will not be published. Required fields are marked *