Gravity-Fed vs. Electronic Hoppers | Paintball

Gravity-Fed vs. Electronic Hoppers | Paintball


My name is Mike Peverill. I’m here at Pev’s Paintball Park in Aldie,
Virginia. I’ve been playing paintball nearly 30 years. I’ve played professional paintball with numerous
pro teams all over the world. This facility here was built from the ground
up for paintball, kind of like a paintball Disney Land. Our website is www.pevs.com. Hopefully you can come out and visit us sometime. What I have here is two types of hoppers (feeders)
— those are both names you’ll hear used to refer to them as. They hold the paintballs on top of the paintball
gun, each one holds roughly around 200 paintballs on average, as you see they sit on top of
the paintball gun, and the paintballs will feed into the ball chamber of the gun. Now think about it, this is all done by gravity,
so when you have 200 balls packed inside the hopper, and they’re all trying to fit down
this same tube, not every single ball’s gonna feed as fast as the gun will fire. It relies on the gun’s back recoil, or the
shaking of the gun to kind of agitate it a little bit to feed the gun. So if I’m firing the gun quickly, I may have
to shake the gun a little bit to get the balls through the feed, because there’s nothing
inside of it force feeding the gun. Now on the other hand, I have an agitating
loader which is battery-operated, it has a system inside, it feeds in. The reason why it’s spinning right now is
because there’s no balls inside. And what happens is when there’s no balls
inside, it’s gonna keep feeding, because it’s electronic. Its sensor’s telling it “Hey, feed balls.” Now if you notice, now I put balls inside
of it, the motor’s stopped spinning, so it knows that there’s balls inside of it, but
I’m not firing the gun, so there’s no reason for it to kick on. However, when I start firing the gun, the
agitator will kick on because the sensor will feel I need to push balls into the gun, it’ll
help it so it keeps up with the rate of fire. So, now what we have here is the feeder on
top of the gun, and you’re in a firefight, and you’re feeding, this thing is not gonna
let me get stuck, where my balls aren’t feeding quick enough down into there. However if I’m using this agitating loader,
my problem is I’m gonna have to shake and hope. And imagine, that one time that I have to
shake, someone else could have shot me, and I missed my shot. So that’s why it’s important. I tell everybody, what you should always put
with any paintball gun is an agitating feeder. Stay away from gravity-fed loaders — even
with a paintball gun like this, a basic gun, I tell people, “Use one of these.” High-end gun, you’ll have to use one of these,
low-end gun, I highly recommend it.

72 Comments

Leave a Reply

Your email address will not be published. Required fields are marked *