DIY Miniature School Supplies! Mini Notebook, Mini Pens & more! Easy DIY Crafts & School Hacks!

DIY Miniature School Supplies! Mini Notebook, Mini Pens & more! Easy DIY Crafts & School Hacks!


hey guys welcome back to my Channel
today I’m going to show you DIY miniature school supplies soda inspired
if you enjoy this video please click that like button and comment down below
with any future video suggestions you might have and if you’re not already
subscribed and would like to see more fun DIY videos please click that
subscribe button to get started with this first set of DIY miniature school
supplies you will need some of these miniature hot sauce bottles I will leave
a link down below to where I found these enjoy the hot sauce inside then
thoroughly wash and clean out the bottle and the lid this step is optional but I
chose to remove the little white piece inside of the lid next I’m going to use
some green acrylic paint and I’m going to take four of the caps from the mini
bottles and paint the tops once all my caps were painted I set
those aside and let him dry now I’m going to take some orange acrylic paint
and paint two of the little mini bottles once both of those were painted I set
him aside and let them dry next I printed out these printables I
will leave a link down below where you can find these and then I cut them out now it’s time to start assembling the
school supplies so for this you will need a lipgloss applicator you can find
a new one online or you can use an old one just wash and clean it the other
thing that you can use is a paint brush to get the right length for the bottle
I’m going to use a toothpick and place that in there and mark it off so the
toothpick and the cap will all fit in the bottle once I had it marked then I
just used a pair of scissors and cut it for the first one I’m going to use a
lipgloss applicator I just placed my toothpick next to that marked it and
then cut it down to size after the caps have dried I’m going to place some hot
glue in the cap and glue the applicator to the cap to make the soda bottle highlighter I’m
going to take an orange highlighter remove the cap on the bottom and empty
it out next I put on a pair of gloves and I squeezed out the highlighter into
a cup this step is optional but I wanted my highlighter to smell like Orange
Crush so I’m going to squeeze a little bit of this water enhancer Orange Crush
into it and swirl it around and this actually does smell really really good
when you use the highlighter the next step is just to pour the highlighter
into the mini bottle and do it very slowly because it will get messy if you
try to do it quick now place the cap with the lipgloss applicator into the
bottle using one of the labels I cut out I just
put some glue on the back of it and glued it to the bottle and that is how
you make this miniature soda bottle highlighter to go in the 4-pack to make the miniature soda glue
bottle I’m just going to put a little bit of Elmer’s glue and a cup this step
is optional but if you want your glue to be orange and to smell like orange I
just added a little bit of kool-aid and mix that together for the glue applicator for this one I’m
going to use a paintbrush just make sure it’s one that fits in the bottle use the
toothpick as a guide mark it off and cut it where it needs to be cut next I just
glued it to the cap to get the glue in the bottle I’m going to use a cat
feeding syringe I just place the glue and the syringe and then squeezed it
carefully into the bottle now you can place the cap with the paintbrush on it
into the bottle use one of the labels that was cut out and glue that on to the
bottle and that’s how you make the miniature soda glue
bottle that will go in the 4-pack next will be the DIY miniature pen soda
bottle so for this one you will need a ink pen the first thing that I did for
this one was I took the pen apart and removed the ink from the inside then I
took my toothpick and I marked off on the pen where it needed to be cut and
then I cut it for this one I will be using one of the bottles that I painted
I took one of the labels that I cut out and glued that to the front now I just
glued the pen that I cut to the cap and that is how you make this DIY miniature
soda bottle pen and the last bottle for the 4 pack will be a pencil so for
this one I took my toothpick place that next to another toothpick marked it
where it needed to be cut cut off that end and then I also cut out cut off the
sharp tip from the other end I will be using the pencil led from one
of these pencils glue one side of the toothpick to the pencil led using the
other bottle that I painted I glued the last label to that bottle now glue the
other end of the toothpick to the cap and that is how you make this DIY
miniature pencil soda bottle for the 4-pack to make the soda carrier to fit
all of the little miniature bottles print out both of these boxes and cut
them out next just fold both of your boxes on the lines using an exacto knife
I cut out the handles here are both of my boxes once they were folded in the
handles were cut out next I just glued the boxes together once both of my boxes
were glued then I just glued the backside of one of them and glued the
two together and now you can add all your DIY miniature school supplies to
the little soda box – if you want to make coca-cola what I did for this one is I
took some brown paint and some black paint and I mix that in a cup until I
got the desired color of the cola that I wanted I took four of the little mini bottles and I painted all of those once the
bottles are dry print out the labels cut them out and glue them to the bottles to make the DIY miniature pen for this one I followed the same steps as I did for
the orange soda to make the DIY miniature pencils again
I just followed the same steps as in the orange soda for the glue choose either a
lip gloss applicator or a paintbrush and follow the same steps to make the glue I
poured some glue in a cup and then I added some Cola flavoring extract and
stir that together and to get it in the bottle I use the same procedure as
before and for the highlighter you can use any color I chose blue I just
followed the same steps and this time I mixed in some of the Cola extract just
like I did in the glue and that’s how you make the amazing smelling Cola
highlighter now print out and cut out and assemble the boxes the same way as
the orange soda and that’s all there is to the easy DIY
miniature coca-cola school supplies now to make the miniature squishy notebook
you will need a foam roller like this mark the middle of the roller and then
cut it in half using some sterling silver acrylic paint
I painted the rollers print out the soda labels and using
clear tape tape over the top and cut them out glue the back of the label and glue to
the roller using a piece of cardstock paper I placed the soda can on top of
that and traced around it and cut it out gather a bunch of sheets of paper
and take the piece of cardstock that was cut out trace around that and cut out
several sheets to form the notebook once you have all your sheets of paper cut
out take the piece of cardstock and place that on the back and then just
with some Elmer’s glue I glued along the top to bind the notebook here is mine
once it was dry the next thing I did was I just glued on the piece of cardstock
and glued that to the soda can and that is how you make this easy DIY
miniature squishy soda-can notebook I hope you guys enjoyed all of these DIY
miniature school supplies inspired by soda as always please remember to Like
subscribe comment and share if you have any future video suggestions leave those
in the comments until next time I hope you guys all have an amazing day

74 Comments

Leave a Reply

Your email address will not be published. Required fields are marked *